Camelbak Groove Stainless .6L - White
- Brand: CAMELBAK
- SKU: CB53289
- Available Stock(s): 20
Filters as you sip, so you can hydrate on the go. Re-usable, BPA-Free, spill-proof bottle with a filter inside.
Turns tap water into freshly filtered water
Sustainable, plant-based filter lasts about 3 months or 48 gallons (180L) of water
Easy to refill and easy to use bottle with a filter built into the straw
Durable and spill-proof
Easy to carry: Integrated loop handle makes it easy to clip a carabiner or carry with the crook of a finger
Taste-free stainless steel is naturally 100% Free of BPA and BPS. No inner liners or plastic coatings that aluminum bottles require.
Independently tested according to NSF/ANSI standard 42 for reduction of chlorine, taste and odor
CamelBak® Big Bite™ Valve is compatible with CamelBak® eddy™ and CamelBak® Groove® bottles
CamelBak® Got Your Bak™ Guarantee: If we built it, we'll Bak it™ with our lifetime guarantee.
Hydration Capacity: 20 oz / .6 L
Total Weight: 8.8 oz
Always: 100% BPA-Free
Warranty: Got Your Bak™ Lifetime Guarantee
Bottle Material: BPA-Free 304 Stainless Steel
Cap Material: BPA-Free Polypropylene
Bite Valve Material: The CamelBak Big Bite™ Valve is made from medical grade silicone
Country of Origin: China
BEFORE USING THE GROOVE
Give your Fresh™ Filter a quick 15-second rinse the first time you use it to dislodge any harmless, loose particles of carbon, then set it aside, as no additional cleaning is recommended.
If you accidentally run your filter through the dishwasher, discard and replace it with a new filter.
BEFORE CLEANING THE GROOVE
Remove the carbon filter as it is not dishwasher safe.
CLEANING THE GROOVE STAINLESS
The Groove Stainless bottle can be easily cleaned with a bottle brush using warm water and mild soap. The straw, bite valve and cap are dishwasher-safe. Simply remove the straw and bite valve from the cap and place in the top rack for washing, or hand-wash in warm water and mild soap.
CLEANING THE LID
The bite valve, straw and lid can be cleaned in the top rack of the dishwasher or by hand with warm, soapy water. Pull off the bite valve and straw from the cap. If you like to use a bottle brush, we don’t recommend forcing a brush through the Bite Valve slit. If you have the brush kit, run the small brush through the straw.
For a deeper cleaning, add a drop of mild soap or tablespoon of bleach to a clean glass jar filled with water. Drop the bite valve, straw and cap into the solution, and tightly close the jar’s lid. Shake the mixture around for 30 seconds, and then let the parts soak for about 15 minutes. Rinse and shake dry.
To re-assemble the lid:
Flip the stem collar (the component the bite valve attached to originally) to the open position. Orient the bite valve so the finger tab points towards the front of the cap. Push the bite valve firmly onto the stem collar. Press the straw back into place on the bottom of the lid. Ensure the straw covers the notches completely.
Be The First To Review This Product!
Help other Australian Defence Apparel Pty Ltd users shop smarter by writing reviews for products you have purchased.